Shohei Hype
-
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@bob_loblaw1984 said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
Why would you need 2 cards if they make his card work correctly? He should be a SP/OF card with a stamina bar that effects only his pitching. You should be able to select in pre game menu whether to put him in the lineup, or start him on the mound.
This. Yes. Very much this.
SDS dropped the ball on not allowing this Shohei card to play 2-way.
I am sure it's a coding issue. It's been in the game forever that sp's can't play the field. I am sure it's a legacy coding problem. My way works around that particular problem if that is indeed the problem.
It may be, but I dont quite understand why it would be that big of an issue. You used to be able to leave any position player in to pitch before. I cant see why selecting any card as your starting pitcher would be hard to code. You can currently start relievers, and pinch hit/run with pitchers.
You can't put a pitcher in the outfield or a position player in the bullpen which is where the legacy code comes in. Leaving a position player in to pitch is not the same.
-
@bwheel1977_psn said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@bob_loblaw1984 said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
Why would you need 2 cards if they make his card work correctly? He should be a SP/OF card with a stamina bar that effects only his pitching. You should be able to select in pre game menu whether to put him in the lineup, or start him on the mound.
This. Yes. Very much this.
SDS dropped the ball on not allowing this Shohei card to play 2-way.
I am sure it's a coding issue. It's been in the game forever that sp's can't play the field. I am sure it's a legacy coding problem. My way works around that particular problem if that is indeed the problem.
It may be, but I dont quite understand why it would be that big of an issue. You used to be able to leave any position player in to pitch before. I cant see why selecting any card as your starting pitcher would be hard to code. You can currently start relievers, and pinch hit/run with pitchers.
You can't put a pitcher in the outfield or a position player in the bullpen which is where the legacy code comes in. Leaving a position player in to pitch is not the same.
You can move Ohtani to the OF though after he has pitched his start, right? Swap positions with your RF and replace the swapped player with your new pitcher. Not sure on this, haven't done it.
-
@chestnuts20_psn said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@bob_loblaw1984 said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
Why would you need 2 cards if they make his card work correctly? He should be a SP/OF card with a stamina bar that effects only his pitching. You should be able to select in pre game menu whether to put him in the lineup, or start him on the mound.
This. Yes. Very much this.
SDS dropped the ball on not allowing this Shohei card to play 2-way.
I am sure it's a coding issue. It's been in the game forever that sp's can't play the field. I am sure it's a legacy coding problem. My way works around that particular problem if that is indeed the problem.
It may be, but I dont quite understand why it would be that big of an issue. You used to be able to leave any position player in to pitch before. I cant see why selecting any card as your starting pitcher would be hard to code. You can currently start relievers, and pinch hit/run with pitchers.
You can't put a pitcher in the outfield or a position player in the bullpen which is where the legacy code comes in. Leaving a position player in to pitch is not the same.
You can move Ohtani to the OF though after he has pitched his start, right? Swap positions with your RF and replace the swapped player with your new pitcher. Not sure on this, haven't done it.
No you don't have option to move the sp ohtani to any position or even put him on the bench. He can only go in your starting rotation.
-
@chestnuts20_psn said in Shohei Hype:
@untchable704_psn said in Shohei Hype:
It’s a very expensive card for no outlier. Especially considering all those 1st basemen with only one secondary position that all lines up with the top cards in the collections.
All the 1st basemen? You only need to lock 2 of them, Vlad can play 3rd and Mancini, if necessary, can play LF, RF, CF. Although, I went Vlad/Alonso and put Pete on the bench. Forgot about Olson but he can play RF and is only like 10k.
You also forgot the second biggest reward is a first basemen. So when all 3 of the 99s are 1st basemen, yea all the 1st basemen. That set did not work out well.
-
@bwheel1977_psn said in Shohei Hype:
@chestnuts20_psn said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@bob_loblaw1984 said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
Why would you need 2 cards if they make his card work correctly? He should be a SP/OF card with a stamina bar that effects only his pitching. You should be able to select in pre game menu whether to put him in the lineup, or start him on the mound.
This. Yes. Very much this.
SDS dropped the ball on not allowing this Shohei card to play 2-way.
I am sure it's a coding issue. It's been in the game forever that sp's can't play the field. I am sure it's a legacy coding problem. My way works around that particular problem if that is indeed the problem.
It may be, but I dont quite understand why it would be that big of an issue. You used to be able to leave any position player in to pitch before. I cant see why selecting any card as your starting pitcher would be hard to code. You can currently start relievers, and pinch hit/run with pitchers.
You can't put a pitcher in the outfield or a position player in the bullpen which is where the legacy code comes in. Leaving a position player in to pitch is not the same.
You can move Ohtani to the OF though after he has pitched his start, right? Swap positions with your RF and replace the swapped player with your new pitcher. Not sure on this, haven't done it.
No you don't have option to move the sp ohtani to any position or even put him on the bench. He can only go in your starting rotation.
You misunderstood my post. I am saying you can at least keep him in all game after replacing your pitcher.
-
@bwheel1977_psn said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@bob_loblaw1984 said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
Why would you need 2 cards if they make his card work correctly? He should be a SP/OF card with a stamina bar that effects only his pitching. You should be able to select in pre game menu whether to put him in the lineup, or start him on the mound.
This. Yes. Very much this.
SDS dropped the ball on not allowing this Shohei card to play 2-way.
I am sure it's a coding issue. It's been in the game forever that sp's can't play the field. I am sure it's a legacy coding problem. My way works around that particular problem if that is indeed the problem.
It may be, but I dont quite understand why it would be that big of an issue. You used to be able to leave any position player in to pitch before. I cant see why selecting any card as your starting pitcher would be hard to code. You can currently start relievers, and pinch hit/run with pitchers.
You can't put a pitcher in the outfield or a position player in the bullpen which is where the legacy code comes in. Leaving a position player in to pitch is not the same.
What I'm asking is, why couldn't you select an OF to start the game? All you would have to do is select the pitcher spot and swap positions with a position player. You used to be able to do it during the game. From what I could tell, the worst that would happen is the "you have a position player at pitcher" message which you could have an ignore button for. You obviously know more about coding then me, I'm just trying to figure out why that would be game breaking to code.
-
@untchable704_psn said in Shohei Hype:
@chestnuts20_psn said in Shohei Hype:
@untchable704_psn said in Shohei Hype:
It’s a very expensive card for no outlier. Especially considering all those 1st basemen with only one secondary position that all lines up with the top cards in the collections.
All the 1st basemen? You only need to lock 2 of them, Vlad can play 3rd and Mancini, if necessary, can play LF, RF, CF. Although, I went Vlad/Alonso and put Pete on the bench. Forgot about Olson but he can play RF and is only like 10k.
You also forgot the second biggest reward is a first basemen. So when all 3 of the 99s are 1st basemen, yea all the 1st basemen. That set did not work out well.
You're right, forgot Prince.
-
@chestnuts20_psn said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@chestnuts20_psn said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@bob_loblaw1984 said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
Why would you need 2 cards if they make his card work correctly? He should be a SP/OF card with a stamina bar that effects only his pitching. You should be able to select in pre game menu whether to put him in the lineup, or start him on the mound.
This. Yes. Very much this.
SDS dropped the ball on not allowing this Shohei card to play 2-way.
I am sure it's a coding issue. It's been in the game forever that sp's can't play the field. I am sure it's a legacy coding problem. My way works around that particular problem if that is indeed the problem.
It may be, but I dont quite understand why it would be that big of an issue. You used to be able to leave any position player in to pitch before. I cant see why selecting any card as your starting pitcher would be hard to code. You can currently start relievers, and pinch hit/run with pitchers.
You can't put a pitcher in the outfield or a position player in the bullpen which is where the legacy code comes in. Leaving a position player in to pitch is not the same.
You can move Ohtani to the OF though after he has pitched his start, right? Swap positions with your RF and replace the swapped player with your new pitcher. Not sure on this, haven't done it.
No you don't have option to move the sp ohtani to any position or even put him on the bench. He can only go in your starting rotation.
You misunderstood my post. I am saying you can at least keep him in all game after replacing your pitcher.
In previous years this may have worked. I remember doing that for grinding but I the 3 batter min will absolutely F you. Once you swap RF to P, that RF now needs to pitch to 3 guys before being yanked.
Thats assuming they even allow the swap.
I know I used to leave my PH guy in on the mound to see who the other team would bring in for their pitcher but doing that now results in the same issue so the game makes you pick your P first.
-
@chestnuts20_psn said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@chestnuts20_psn said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@bob_loblaw1984 said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
Why would you need 2 cards if they make his card work correctly? He should be a SP/OF card with a stamina bar that effects only his pitching. You should be able to select in pre game menu whether to put him in the lineup, or start him on the mound.
This. Yes. Very much this.
SDS dropped the ball on not allowing this Shohei card to play 2-way.
I am sure it's a coding issue. It's been in the game forever that sp's can't play the field. I am sure it's a legacy coding problem. My way works around that particular problem if that is indeed the problem.
It may be, but I dont quite understand why it would be that big of an issue. You used to be able to leave any position player in to pitch before. I cant see why selecting any card as your starting pitcher would be hard to code. You can currently start relievers, and pinch hit/run with pitchers.
You can't put a pitcher in the outfield or a position player in the bullpen which is where the legacy code comes in. Leaving a position player in to pitch is not the same.
You can move Ohtani to the OF though after he has pitched his start, right? Swap positions with your RF and replace the swapped player with your new pitcher. Not sure on this, haven't done it.
No you don't have option to move the sp ohtani to any position or even put him on the bench. He can only go in your starting rotation.
You misunderstood my post. I am saying you can at least keep him in all game after replacing your pitcher.
No,, he has to come out of the game when you replace him. There is no keeping him in the game because he would have to subbed for during the double switch which is what i am assuming you mean.
-
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@bob_loblaw1984 said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
Why would you need 2 cards if they make his card work correctly? He should be a SP/OF card with a stamina bar that effects only his pitching. You should be able to select in pre game menu whether to put him in the lineup, or start him on the mound.
This. Yes. Very much this.
SDS dropped the ball on not allowing this Shohei card to play 2-way.
I am sure it's a coding issue. It's been in the game forever that sp's can't play the field. I am sure it's a legacy coding problem. My way works around that particular problem if that is indeed the problem.
It may be, but I dont quite understand why it would be that big of an issue. You used to be able to leave any position player in to pitch before. I cant see why selecting any card as your starting pitcher would be hard to code. You can currently start relievers, and pinch hit/run with pitchers.
You can't put a pitcher in the outfield or a position player in the bullpen which is where the legacy code comes in. Leaving a position player in to pitch is not the same.
What I'm asking is, why couldn't you select an OF to start the game? All you would have to do is select the pitcher spot and swap positions with a position player. You used to be able to do it during the game. From what I could tell, the worst that would happen is the "you have a position player at pitcher" message which you could have an ignore button for. You obviously know more about coding then me, I'm just trying to figure out why that would be game breaking to code.
I may try it when I get home. Use an opener RP and after the first inning swap him with Ohtani and put him in RF. There has to be a way.
-
I'm almost positive he will be the MLBTS 22 cover boy!
-
@bwheel1977_psn said in Shohei Hype:
@chestnuts20_psn said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@chestnuts20_psn said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@bob_loblaw1984 said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
Why would you need 2 cards if they make his card work correctly? He should be a SP/OF card with a stamina bar that effects only his pitching. You should be able to select in pre game menu whether to put him in the lineup, or start him on the mound.
This. Yes. Very much this.
SDS dropped the ball on not allowing this Shohei card to play 2-way.
I am sure it's a coding issue. It's been in the game forever that sp's can't play the field. I am sure it's a legacy coding problem. My way works around that particular problem if that is indeed the problem.
It may be, but I dont quite understand why it would be that big of an issue. You used to be able to leave any position player in to pitch before. I cant see why selecting any card as your starting pitcher would be hard to code. You can currently start relievers, and pinch hit/run with pitchers.
You can't put a pitcher in the outfield or a position player in the bullpen which is where the legacy code comes in. Leaving a position player in to pitch is not the same.
You can move Ohtani to the OF though after he has pitched his start, right? Swap positions with your RF and replace the swapped player with your new pitcher. Not sure on this, haven't done it.
No you don't have option to move the sp ohtani to any position or even put him on the bench. He can only go in your starting rotation.
You misunderstood my post. I am saying you can at least keep him in all game after replacing your pitcher.
No,, he has to come out of the game when you replace him. There is no keeping him in the game because he would have to subbed for during the double switch which is what i am assuming you mean.
That is not what I mean.
-
@chestnuts20_psn said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@bob_loblaw1984 said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
Why would you need 2 cards if they make his card work correctly? He should be a SP/OF card with a stamina bar that effects only his pitching. You should be able to select in pre game menu whether to put him in the lineup, or start him on the mound.
This. Yes. Very much this.
SDS dropped the ball on not allowing this Shohei card to play 2-way.
I am sure it's a coding issue. It's been in the game forever that sp's can't play the field. I am sure it's a legacy coding problem. My way works around that particular problem if that is indeed the problem.
It may be, but I dont quite understand why it would be that big of an issue. You used to be able to leave any position player in to pitch before. I cant see why selecting any card as your starting pitcher would be hard to code. You can currently start relievers, and pinch hit/run with pitchers.
You can't put a pitcher in the outfield or a position player in the bullpen which is where the legacy code comes in. Leaving a position player in to pitch is not the same.
What I'm asking is, why couldn't you select an OF to start the game? All you would have to do is select the pitcher spot and swap positions with a position player. You used to be able to do it during the game. From what I could tell, the worst that would happen is the "you have a position player at pitcher" message which you could have an ignore button for. You obviously know more about coding then me, I'm just trying to figure out why that would be game breaking to code.
I may try it when I get home. Use an opener RP and after the first inning swap him with Ohtani and put him in RF. There has to be a way.
It won't give you that option. He will be in your sp section and not your bench section. He would auto go to the mound. The hrd version can be done this way because it's an outfield card.
-
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@bob_loblaw1984 said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
Why would you need 2 cards if they make his card work correctly? He should be a SP/OF card with a stamina bar that effects only his pitching. You should be able to select in pre game menu whether to put him in the lineup, or start him on the mound.
This. Yes. Very much this.
SDS dropped the ball on not allowing this Shohei card to play 2-way.
I am sure it's a coding issue. It's been in the game forever that sp's can't play the field. I am sure it's a legacy coding problem. My way works around that particular problem if that is indeed the problem.
It may be, but I dont quite understand why it would be that big of an issue. You used to be able to leave any position player in to pitch before. I cant see why selecting any card as your starting pitcher would be hard to code. You can currently start relievers, and pinch hit/run with pitchers.
You can't put a pitcher in the outfield or a position player in the bullpen which is where the legacy code comes in. Leaving a position player in to pitch is not the same.
What I'm asking is, why couldn't you select an OF to start the game? All you would have to do is select the pitcher spot and swap positions with a position player. You used to be able to do it during the game. From what I could tell, the worst that would happen is the "you have a position player at pitcher" message which you could have an ignore button for. You obviously know more about coding then me, I'm just trying to figure out why that would be game breaking to code.
You are talking about a double switch. When you double switch then the pitcher will go to the mound and the position player will go to outfield. You can leave a pinch hitter in to pitch but can't leave a pitcher in the field.
There is code that has been in the game since the beginning. It's in ever iteration so if you mess with this particular code then it could break other things in the game. It could cause glitches like the trying to make you take out your sp after first mound visit glitch. Most coders i know don't like to mess with legacy code but would rather completely work around it but that takes time and the coders in this game are working on the next iteration more than they work on current version.
-
@bwheel1977_psn said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@bob_loblaw1984 said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
Why would you need 2 cards if they make his card work correctly? He should be a SP/OF card with a stamina bar that effects only his pitching. You should be able to select in pre game menu whether to put him in the lineup, or start him on the mound.
This. Yes. Very much this.
SDS dropped the ball on not allowing this Shohei card to play 2-way.
I am sure it's a coding issue. It's been in the game forever that sp's can't play the field. I am sure it's a legacy coding problem. My way works around that particular problem if that is indeed the problem.
It may be, but I dont quite understand why it would be that big of an issue. You used to be able to leave any position player in to pitch before. I cant see why selecting any card as your starting pitcher would be hard to code. You can currently start relievers, and pinch hit/run with pitchers.
You can't put a pitcher in the outfield or a position player in the bullpen which is where the legacy code comes in. Leaving a position player in to pitch is not the same.
What I'm asking is, why couldn't you select an OF to start the game? All you would have to do is select the pitcher spot and swap positions with a position player. You used to be able to do it during the game. From what I could tell, the worst that would happen is the "you have a position player at pitcher" message which you could have an ignore button for. You obviously know more about coding then me, I'm just trying to figure out why that would be game breaking to code.
You are talking about a double switch. When you double switch then the pitcher will go to the mound and the position player will go to outfield. You can leave a pinch hitter in to pitch but can't leave a pitcher in the field.
There is code that has been in the game since the beginning. It's in ever iteration so if you mess with this particular code then it could break other things in the game. It could cause glitches like the trying to make you take out your sp after first mound visit glitch. Most coders i know don't like to mess with legacy code but would rather completely work around it but that takes time and the coders in this game are working on the next iteration more than they work on current version.
In 18 when grinding those terrible missions like 4x 2bs with Nava, I would intentionally walk the tying run in to advance another inning to get another at bat with Nava. I would always swap the catcher and pitcher to intentionally walk those runs in so I didnt blow my pitchers ERA up. Then I would swap them back to get the final out. That's not a double switch, its swapping positions. A double switch requires a substitution, which wouldn't happen pre game as lineups arent set yet.
I know it's a little different now with the 3 batter minimums and other rules recently implemented, but you used to be able to do it in game before.
-
Im obsessed with Shohei so he will never leave my lineup when I finish up TA3 tonight
-
@bwheel1977_psn said in Shohei Hype:
@chestnuts20_psn said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@chestnuts20_psn said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@bob_loblaw1984 said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
Why would you need 2 cards if they make his card work correctly? He should be a SP/OF card with a stamina bar that effects only his pitching. You should be able to select in pre game menu whether to put him in the lineup, or start him on the mound.
This. Yes. Very much this.
SDS dropped the ball on not allowing this Shohei card to play 2-way.
I am sure it's a coding issue. It's been in the game forever that sp's can't play the field. I am sure it's a legacy coding problem. My way works around that particular problem if that is indeed the problem.
It may be, but I dont quite understand why it would be that big of an issue. You used to be able to leave any position player in to pitch before. I cant see why selecting any card as your starting pitcher would be hard to code. You can currently start relievers, and pinch hit/run with pitchers.
You can't put a pitcher in the outfield or a position player in the bullpen which is where the legacy code comes in. Leaving a position player in to pitch is not the same.
You can move Ohtani to the OF though after he has pitched his start, right? Swap positions with your RF and replace the swapped player with your new pitcher. Not sure on this, haven't done it.
No you don't have option to move the sp ohtani to any position or even put him on the bench. He can only go in your starting rotation.
You misunderstood my post. I am saying you can at least keep him in all game after replacing your pitcher.
No,, he has to come out of the game when you replace him. There is no keeping him in the game because he would have to subbed for during the double switch which is what i am assuming you mean.
He's talking about swapping positions with an OF. It will allow you to do this because I did it the other day with Ohtani's LS card to see if it would let him pitch.
-
He's great if you just get him naturally and not rush to spend hundreds of thousands of stubs. More packs will be released in programs for free. He'll be a good pitcher and elite pinch hitter in games where he has no energy.
-
@khain24_psn said in Shohei Hype:
@qwesty16_mlbts said in Shohei Hype:
Now my starting rotation
TA3 degrom
AS ohtani
F. Valenzuela
Crochet
Leiter
Jenkins
CabreraWay too many end game pitchers.
There is no such thing as "too many end game pitchers". The more end game pitchers means more variety which is a good thing. Same with all the juiced up high diamond releases everyone wants to complain about. Variety is good. I dont think anyone really wants to go back to having the same lineups face each other every game.
People actually complaining about more content. Complain about bad animation and the Cheating with certain product.
-
@dewrock_psn said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@chestnuts20_psn said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@chestnuts20_psn said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
@bwheel1977_psn said in Shohei Hype:
@bob_loblaw1984 said in Shohei Hype:
@poksey_mlbts said in Shohei Hype:
Why would you need 2 cards if they make his card work correctly? He should be a SP/OF card with a stamina bar that effects only his pitching. You should be able to select in pre game menu whether to put him in the lineup, or start him on the mound.
This. Yes. Very much this.
SDS dropped the ball on not allowing this Shohei card to play 2-way.
I am sure it's a coding issue. It's been in the game forever that sp's can't play the field. I am sure it's a legacy coding problem. My way works around that particular problem if that is indeed the problem.
It may be, but I dont quite understand why it would be that big of an issue. You used to be able to leave any position player in to pitch before. I cant see why selecting any card as your starting pitcher would be hard to code. You can currently start relievers, and pinch hit/run with pitchers.
You can't put a pitcher in the outfield or a position player in the bullpen which is where the legacy code comes in. Leaving a position player in to pitch is not the same.
You can move Ohtani to the OF though after he has pitched his start, right? Swap positions with your RF and replace the swapped player with your new pitcher. Not sure on this, haven't done it.
No you don't have option to move the sp ohtani to any position or even put him on the bench. He can only go in your starting rotation.
You misunderstood my post. I am saying you can at least keep him in all game after replacing your pitcher.
No,, he has to come out of the game when you replace him. There is no keeping him in the game because he would have to subbed for during the double switch which is what i am assuming you mean.
He's talking about swapping positions with an OF. It will allow you to do this because I did it the other day with Ohtani's LS card to see if it would let him pitch.
How do you swap positions during a ranked game tho? at the lineup screen? It wouldn't work on this one because it doesn't have the secondaries does it?
